Displaying 50 featured courses.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s671/www.aecdaily.com/course/985501
The primary purpose of a roof is to provide shelter and protection; to do so effectively over the long term, proper drainage and ventilation are required. Presented here are the categories of metal roofing, the moisture- and noise-related issues associated with architectural metal roofs, the use of a three-dimensional drainage and ventilation mat as a solution to these issues, and best practices for incorporating a mat in metal and cedar roof assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1608/www.aecdaily.com/course/903341
Ventilation grilles influence HVAC system performance but can pose aesthetic challenges for designers. Custom grilles made with modern fabrication techniques employ a variety of materials and finishes to create solutions that enhance and fully integrate with architectural interiors. This course discusses the basic mechanics of effective air distribution in buildings, performance characteristics of grilles, grille types, and custom design options.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s3552/www.aecdaily.com/course/884605
Trash, recycling, and linen chutes must be designed, installed, and maintained to meet the 2019 NFPA 82 standard. This course addresses trash, recycling, and linen chutes and includes discussions on system components, accessory components, compactors and sorters, and meeting NFPA 82 requirements. The program also guides you through a typical installation of a chute system.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5057/www.aecdaily.com/course/888587
Building owners value daylighting and views but face security and safety challenges with large amounts of glazing. Thermoplastic sheet products offer a variety of glazing solutions that resist security threats while providing transparency, strength, and durability. This course introduces the grades and characteristics of acrylic and polycarbonate sheet products and discusses how they meet the requirements for protection against forced entry and ballistics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s12219/www.aecdaily.com/course/828002
While the kitchen has long been considered the heart of the home, the bathroom is often thought of as a utilitarian space. However, by drawing inspiration from kitchen design principles, designers can create a bathroom that’s personalized, organized, and highly functional. Beyond serving basic needs, the bathroom is a space for relaxing, recharging, and preparing for the day ahead. This course discusses strategies for incorporating organization, ergonomics, personalization, and technology to create a streamlined styling space.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s12219/www.aecdaily.com/course/1062036
Modular systems are designed around individual components that can be joined together to configure a seamless and personalized space solution. This course discusses the key design principles and benefits of modular design along with strategies for successfully incorporating modularity into a bathroom design.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s777575/www.aecdaily.com/course/788434
Architectural resin panels are engineered to suit the demands of a wide array of interior and exterior applications and offer almost unlimited combinations of color, pattern, and design. This course presents the features and options that allow resin panels to meet design requirements for both function and beauty and discusses how resin panels may play a role in projects seeking LEED® v4 BD+C, ID+C, and O+M; Living Building ChallengeSM v3.1; or WELL Building Standard® v1 certification.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/948026
Thermal modification is a tried and tested process for increasing the durability of wood while maintaining a warm aesthetic in building design. This course examines all aspects of this sustainable wood product and how it can be incorporated into a variety of projects.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/1016042
Saunas that exude authentic Nordic minimalism and elegance promote wellness, relaxation, meditation, and socialization. There are many different types of saunas for private or public purposes, but a few unique features and finishing options set some sauna designs apart. This course explains why the sauna has a much deeper tradition than wellness and discusses the considerations for selecting a ready-made or tailor-made sauna solution.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s936437/www.aecdaily.com/course/1147982
Biophilic design is a methodology for designing buildings and landscapes that improve human health and well-being while fostering a deeper appreciation for the natural world. This course provides an overview of biophilic design and its frameworks and how it can help projects earn certification through LEED® v4.1 Building Design and Construction (BD+C): New Construction, WELL Building Standard™ version 2, Sustainable SITES Initiative® v2, and the Living Building Challenge (LBC).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s973583/www.aecdaily.com/course/984372
Today's architects are faced with a difficult task: how best to design buildings that meet up-to-date energy codes while keeping costs down and clients happy. Developments in filtration technology make it possible to conserve energy, improve indoor air quality (IAQ), and dramatically reduce ongoing utility and operating costs. This course reviews advanced engineered solutions for energy savings and air quality for commercial, institutional, medical, pharmaceutical, and other critical applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1002402/www.aecdaily.com/course/1036036
The trend toward more sustainable, healthy, and energy-conserving enclosures has brought building science and moisture management to the forefront of daily conversation for professionals in the construction industry. In this course, we delve into the science behind current practices and explore the role of building envelopes, optimal wall assemblies, and enclosures in vapor, water, air, and thermal control.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1002402/www.aecdaily.com/course/1130971
Humidity affects numerous industries, potentially leading to building damage and health problems. Mechanical dehumidifiers play a critical role in controlling humidity across different environments, ensuring comfort and safety while preventing any humidity or condensation issues that interfere with daily business. In this course, we provide insight into the principles of psychrometrics, enabling participants to understand the properties of air and water vapor mixtures significant to moisture control. We explore the operation of mechanical (vapor compression) dehumidifiers, their performance parameters and limitations, and installation configurations. Finally, we examine some examples of beneficial applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1085380/www.aecdaily.com/course/1111123
Seniors represent a rapidly growing segment of the population and are entitled to living spaces that promote their safety and wellness. This course emphasizes the importance of accessibility and universal design in meeting the diverse needs of users of all ages and abilities. Specifically, it explores the use of adjustable lavatories and salon sink systems in senior living residences and how they cater to the needs of residents and personal care workers. The course also covers relevant plumbing and electrical codes and standards.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s19104/www.aecdaily.com/course/1056062
Good building envelope design provides a weathertight and insulated structure. However, additional attachments are often required for safety, aesthetic, or functional reasons. This course discusses the design and installation of snow retention systems and mounting systems for solar panels that maintain roof integrity, contribute to a long-lasting building envelope system, and support solar energy and safety.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s624574/www.aecdaily.com/course/1025181
While frequently chosen for aesthetics and durability, clay brick is not often considered when energy efficiency is a primary concern, even though it historically played a significant role in occupant comfort before the widespread use of HVAC systems. This course discusses the basics of heat transfer, relevant energy code provisions for walls, and how current research by the National Brick Research Center demonstrates the role that brick veneer can play in meeting or exceeding energy requirements in modern wall assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/969021
A metal roof combines performance and aesthetics to give commercial and residential buildings strength, longevity, and character. This course examines the features and benefits of standing seam metal roofing and explains the factors to consider when selecting a project-specific metal roofing system.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/978835
The beaches and proximity to the Atlantic Ocean are some of the advantages of living in Florida. However, the extreme wind forces from hurricanes can easily damage even the strongest buildings and cause billions of dollars in property loss. As a result, certain areas of Florida―Miami-Dade and Broward Counties—have been designated High Velocity Hurricane Zones. The building products used in these zones must be laboratory tested to meet extreme wind and pressure performance standards. This course explains why a metal roof system designed to minimize the damage from hurricanes is important.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5533/www.aecdaily.com/course/1121832
Wind load can significantly impact buildings, affecting their structural integrity and safety. Perimeter roof edge systems are a primary safeguard during strong wind events. This course provides an overview of the types, features, and benefits of perimeter roof edge systems, system selection considerations, the impact of wind uplift on roofs, and the building codes and testing standards applicable to perimeter roof edge systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1125667/www.aecdaily.com/course/1152569
In this course, we will review the history and evolution of synthetic turf, the most popular applications, and various types of turf intended for different uses. We will also review synthetic turf installation basics, present some insight into the manufacturing process, explore recent innovations, and conclude with detailed specifications for selecting the right type of turf.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1152/www.aecdaily.com/course/869476
Resiliency is a growing necessity. It is important to understand the impacts on the built environment resulting from natural and manmade disasters and disturbances and to design for those impacts now. Presented in this course is an overview of the benefits of using steel doors as part of a resilient design strategy for applications requiring resistance to blasts, tornadoes, and ballistics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s1051417/www.aecdaily.com/course/1061717
Now more than ever, the environmental impacts of products used in construction are a worldwide concern and one that the architecture and design (A&D) community is being asked to address in their work. Environmental product declarations (EPDs) are powerful tools when choosing materials for commercial projects. This course discusses how, where, and why to use EPDs to inform sustainable product selection and specification decisions and how EPDs are incorporated into key green building rating systems and codes, including LEED® v4.1 Building Design and Construction (BD+C) and Interior Design and Construction (ID+C), Green Globes® for New Construction (NC), and the International Green Construction Code® (IgCC®).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/893368
An air curtain, also known as an air door, employs a controlled stream of air aimed across an opening to create an air seal. This seal separates different environments while allowing a smooth, unhindered flow of traffic and unobstructed vision through the opening. This course discusses how air curtains work and why they can contribute to occupant comfort, energy efficiency, and indoor air quality when the door is open. It also reviews how air curtains improve whole-building energy efficiency versus conventional methods.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s2356/www.aecdaily.com/course/957597
Main entrance air curtains are used by architects and engineers in commercial, institutional, and industrial settings to both improve energy efficiency and protect occupant comfort and well-being. This course reviews the research that led to air curtains being approved as an alternative to vestibules in ASHRAE 90.1-2019 and other building codes, as well as how air curtains on main entries contribute to sustainability goals around energy conservation, public health, and indoor air quality.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/899778
Insulation can help increase overall energy efficiency, minimize the spread of fire, manage risks associated with moisture and mold, and improve occupant comfort. Choosing the right insulation and putting it in the right location is becoming one of the most important decisions in design, construction, and retrofit. Reviewed in this course are the features, benefits, and design and installation considerations related to mineral wool continuous insulation.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/924606
One of the most complex and least understood areas where fire can propagate is at the perimeter of a multistory building. Fire can spread not only from floor to floor via the edge-of-slab/curtain wall intersections but also along the exterior building enclosure where untested, combustible components are often installed. This program outlines best design practices for providing fire protection for building occupants per ASTM E2307 and ASTM E2874.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1009062
Protected roof membrane assemblies (PRMAs), and vegetative roof assemblies (VRAs) in particular, place extreme requirements on the components below the surface, from waterproofing to insulation and everything in between. Each element must meet specific standards for energy efficiency and durability. This course reviews the benefits and design considerations of VRAs. It also describes the high-performance attributes of VRA components and defines the building code/performance standards and best specification practices for optimal fire, wind, thermal, and moisture performance.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1067507
This course explains the NFPA 285 test method, its origin, its procedures, when it is required, and design considerations necessary for compliance. Criteria in ASHRAE 90.1 for continuous insulation and air/water-resistive barriers are reviewed and identified as contributors to the rise of NFPA 285 requirements. The course also addresses code compliance in light of recent material changes, code changes, and additional testing.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5023/www.aecdaily.com/course/1119498
A growing number of high-rise fire incidents around the world have raised awareness about the fire safety performance of taller structures. Timing for containing a high-rise fire is critical, as high numbers of occupants have limited means of escape. Vertical fire spread along the exterior facade may quickly overwhelm firefighters at ground level, especially if it advances to heights beyond the reach of their ground attack. This course looks at issues surrounding high-rise fires, how they spread, and how following building codes and proper material testing can lessen the risk or impact of these blazes.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5759/www.aecdaily.com/course/1030625
Metal roof and wall systems have long been specified for commercial, residential, and industrial buildings because they have a lengthy history of durability, reliability, and resilience. This course examines the attributes of metal panel systems and the design options that make metal-clad buildings sustainable, attractive, and suitable for a variety of applications and environmental conditions.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/857032
It's time to stop thinking of only vertical pickets, horizontal rails, or glass panels when it comes to railing infill. Today's cable railing infill options are durable, versatile, attractive, low maintenance, easy to use, and virtually invisible. This course provides an overview of the advantages of stainless steel cable railing assemblies including frame design options and essential cable assembly components. It continues with a review of code requirements and concludes with a discussion of installation processes for custom cable assemblies.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/899008
Railings are often one of the most important parts of a deck or stair project because of the safety and security they provide, but they can offer character, style, and beauty as well as functionality. Today's railing systems present many possibilities to create a unique design perfectly suited to the project needs. This course examines high-strength, powder-coated aluminum railings, from code considerations to installation and maintenance. It presents the versatile, mix-and-match capability of finishes, top rail styles, lighting, and infill options that offer long-lasting, easy-to-install solutions for residential and commercial applications.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s5833/www.aecdaily.com/course/1115032
Elevate your railing designs with a premanufactured system without compromising aesthetics or adaptability to site conditions. When you choose a manufacturer with design and engineering capabilities, you can customize premanufactured systems to meet safety standards AND enhance a project’s design. In this course, we discuss how a railing manufacturer helped three architects create unique solutions from premanufactured components.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s7000/www.aecdaily.com/course/999504
Parking in buildings can be challenging to design because of space constraints. Automated parking lets architects design better buildings by maximizing parking capacity, using fewer resources, and providing a better parking experience for users. This course explains the different types of automated parking, their benefits and limitations, and what to consider when choosing automated parking for a project.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s10015/www.aecdaily.com/course/819523
The beautiful gray patina of zinc architectural metal has graced the rooftops of buildings in Europe for hundreds of years. This course examines the sustainable characteristics of zinc as a roofing material, including its 100% recyclability, zero VOC requirement, and low embodied energy production process. The life cycle analysis of zinc is examined, as is zinc’s long-term service life. Various types of roof and wall applications are also discussed.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s13250/www.aecdaily.com/course/909350
Ensuring a building’s roof is waterproof, on top of being structurally sound, is critical to the success of any building project. This course examines rapid curing, polymeric liquid-applied waterproofing membranes for roofing and other demanding applications. Discussions include the history of PMMA, PMMA system components and characteristics, the installation process, and the versatility of PMMA products.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s14751/www.aecdaily.com/course/950260
Over the past few decades, exterior building spaces and roofs have significantly transformed from utilitarian ballasted roof systems to roof systems with highly programmed, environmentally conscious, people-friendly amenities that promote healthier lifestyles. A variety of products and materials can be utilized in the design and construction of roof gardens and decks. This course reviews the construction of basic types of roof systems and the range of hardscaping products that are available to designers.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s405633/www.aecdaily.com/course/928589
Within building spaces, noise can be reduced by using materials or assemblies that isolate sound or mitigate its transmission. To do this, it is important to understand how sound moves through building materials and partitions and the impact of sound mitigation products. In this course, we look at the basics of sound as well as techniques and products to prevent sound transmission.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s431285/www.aecdaily.com/course/1106562
Vinyl membrane decking can prolong the life cycle of various building components; however, performance and durability depend on vinyl membrane selection, specification, and installation. Fortunately, vinyl membrane manufacturers can support architects, contractors, and specifiers through all phases of the project to ensure a successful outcome. This course examines walkable, waterproof roof deck membranes and roofing systems and includes discussions on system characteristics, design considerations, and how to properly specify roof deck membrane systems.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s671504/www.aecdaily.com/course/924622
Stone is perhaps man's oldest, most durable, most reliable, and most beautiful building material. It is now possible to acquire all of its benefits without the need for heavy, thick, and expensive walls and foundations. This course explains how natural thin stone veneer can be economically utilized to protect and beautify commercial, institutional, and residential indoor and outdoor surfaces, the varying attributes of different stones, the numerous looks that can be achieved, and the standards that inform their selection, specification, and usage.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s671504/www.aecdaily.com/course/935167
Parks, recreational areas, and common rural and urban spaces can be essential relaxing oases. Pathways that navigate through these public spaces should be functional and durable and complement the natural environment. This course explores pathway materials and focuses on decomposed granite (DG) and natural aggregates. It discusses the types of pathways, their applications, installation, and maintenance, as well as their contribution to green design.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s677063/www.aecdaily.com/course/897991
It is an expectation that today’s buildings have to be more than just aesthetically pleasing: they have to provide measurable environmental benefits. This course outlines how insulated concrete forms (ICFs) help meet sustainable design objectives and examines the advantages that ICFs and ICF technology have over conventional construction materials for building envelopes in all building types.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s677063/www.aecdaily.com/course/1104741
Designing beautiful, sustainable, high-performance buildings can help your structures leave a lasting impression and positive impact. Insulating concrete forms (ICFs) accomplish that while providing innovative design possibilities for single or multistory projects. Learn about the features and advantages of building with ICFs designed as a cost-effective, energy-efficient solution that offers substantial benefits over traditional construction methods.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s680223/www.aecdaily.com/course/901794
The key to an energy-efficient metal building is the implementation of a continuous insulation system that virtually eliminates thermal bridging and prevents condensation. This course discusses how using thermal spacer blocks and metal building insulation in the building envelope increases energy performance, protects against condensation, and meets stringent energy code requirements.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s738062/www.aecdaily.com/course/886441
Today's gas fireplaces make a stylish, modern design statement while providing a safe and efficient option for supplemental heat. This course explores the benefits of direct vent, electronic ignition gas fireplaces over other fuel and venting options, with a focus on the innovative features and design possibilities offered by frameless fireplaces suitable for any residential or commercial space. The benefits of a frameless fireplace design, cool wall technology, a heat control system, and integration of the modern fireplace into a home automation system are discussed, and occupant safety features such as double glass heat safety barriers are explained.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s780799/www.aecdaily.com/course/974036
Elevators are integral to accessible, smooth, and efficient operations in many applications. For low-rise buildings, hydraulic elevators or gearless machine room-less (MRL) elevators are most common; this course compares the two in terms of sustainability and cost. Also presented are the history of the elevator, types of elevators suitable for installation in a range of buildings, the distinctions between proprietary and nonproprietary elevator systems, and recommendations on how to specify a nonproprietary system to maximize its long-term benefits.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/961769
Synthetic or artificial grass bears virtually no resemblance to its early version produced over fifty years ago. The current product is much more aesthetically pleasing, safer, softer, and durable, made with environmentally friendly materials, highly customizable to suit many indoor and outdoor uses, and recyclable and nonflammable. This course details the many sustainable attributes of this material; its benefits, construction, and certifications; and numerous sample installations.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/991722
The implementation of synthetic surfacing for leisure and performance applications is rapidly growing. Artificial materials such as synthetic turf (grass), synthetic green walls, and poured-in-place and court surfacing often outperform their natural counterparts. Additionally, increased safety standards and design expectations have accelerated innovation in the materials available to designers. This course outlines synthetic surfacing options and examines synthetic turf systems, detailing their design considerations, performance features, sustainability and health benefits, and associated return on investment (ROI).
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1044992
Communities need accessible, versatile surfaces for play and relaxation for people of all ages and abilities. Modern landscape synthetic turf options are specifically formulated for public recreation spaces frequented by adults, children, and pets. This course reviews the health benefits of being outdoors, the history and fabrication of synthetic turf, the design considerations for various recreation applications, and synthetic turf’s performance and sustainability characteristics.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s796722/www.aecdaily.com/course/1116967
As synthetic turf systems evolve as functional and aesthetic landscape solutions, conversations about sustainability, particularly environmental impacts, are essential. This course addresses the sustainability of synthetic turf from the triple-bottom-line perspective: profit, people, and planet. Also discussed is how synthetic turf can contribute to achieving certification in LEED® v4.1 Building Design and Construction, Sustainable SITES Initiative® v2, and the WELL Building Standard™ version 2.