National Council of Structural Engineers Association

The National Council of Structural Engineers Association is dedicated to advancing the structural engineering profession through education, advocacy, career development, and community.

Click to Learn More About the National Council of Structural Engineers Association

Visit www.ncsea.com and Join Now!

Displaying 1 - 5 of 5 results.

  • ( ~ 1 hour, 15 minutes ) 

    Mechanical vibration and structure-borne noise exist in all building environments. Depending on how severe the disturbance and how sensitive the equipment, the problems caused by the vibration or shock can be negligible or destructive. This course explains why, during the entire building design process, it is essential to consider what a building is being used for and the potential impact of vibration and structure-borne noise, not only from external sources but also from equipment running within the building.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour ) 

    Locating mechanical and electrical equipment on a roof is often necessary for space and efficiency in a building design. However, it can be challenging to provide a means for safe maintenance access while preserving the roof membrane and structural integrity and not interfering with other rooftop equipment. This course presents the components that comprise rooftop support systems designed to solve these challenges, as well as system design considerations and compliance with the International Building Code® (IBC®) and the International Mechanical Code® (IMC®).

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    The need to evaluate thermal bridging in a building’s design and performance has become more prevalent because of the increasing requirements for more energy-efficient buildings. This course provides an introduction to thermal bridging, energy code requirements, and the use of thermal break solutions designed to improve energy efficiency in the building envelope.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    Concrete masonry units (CMUs) are made from dry-cast concrete, which uses less cement and sequesters carbon at a faster and greater rate than wet-cast concrete. This course begins with an overview of concrete products and the differences between dry- and wet-cast concrete, then explores the relationship between concrete and the carbon cycle, recent research into CMU sequestration rates, and the results of mini life-cycle assessments comparing different wall systems. Finally, some practical strategies for further reducing embodied carbon are reviewed.

    Ask a Question
    SAVE FOR LATER
  • ( ~ 1 hour, 15 minutes ) 

    This presentation aims to aid architects, engineers, and specification writers in choosing anchoring systems to comply with the 2022 edition of The Masonry Society’s (TMS) TMS 402 Building Code Requirements for Masonry Structures and the International Building Code® (IBC®).

    Ask a Question
    SAVE FOR LATER

Displaying 1 - 5 of 5 results.