Building Knowledge and Connections
Displaying 1 - 25 of 42 results.
Scan this code with your mobile device camera to take this page on-the-go!
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/822556
Daylight is an essential part of our health and well-being, but it needs management. Shading strives to maximize daylight without compromising building occupant comfort and well-being. This course explores the role daylight has within the built environment and its impact on occupants and energy usage, with a focus on how to better specify shadecloth based on factors such as project type, solar optical properties, shadecloth composition, and environmental factors.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1067121
Electric vehicles (EVs) are rapidly becoming ubiquitous. To serve them sufficiently, there must be a massive expansion of car charging options, and that infers that planners and designers must create those options and opportunities now. This course examines the current trends in, and predictions for, EV chargers, the various types and their attributes, where and how they might be installed for maximum effectiveness, and the programs and incentives that apply to both EVs and their charger requirements.
https://redirect.aecdaily.com/s379346/www.aecdaily.com/course/945582
An energy recovery ventilator (ERV) system provides occupants with filtered, balanced, and tempered air within their living space. Airborne contaminants can be greatly reduced with ERV systems. This course provides knowledge about the need, use, design, and installation of ERVs in the modern dwelling unit and when retrofitting existing structures. The course also addresses the environmental advantages of sustainable and healthy solutions for indoor air quality.
https://redirect.aecdaily.com/s1110015/www.aecdaily.com/course/1147960
Light in the hands of a lighting designer is like a brush in the hands of an artist—it can make or break a show. In this course, we’ll explore the controllable properties of light, the various lighting fixture types and configurations commonly used in a stage setting, and the power and control distribution methods that underpin an effective lighting design. We’ll also review industry standards for low- and medium-voltage control methods, the evolution of related data systems, and the changes it has wrought in the industry.
https://redirect.aecdaily.com/s701406/www.aecdaily.com/course/858594
The growth of EV (electric vehicle) adoption is accelerating and the behavior of EV drivers is increasing the demand for electric vehicle charging stations. This education course explains the different types of charging available and their suitable applications, and discusses the planning and installation considerations for electric vehicle supply equipment (EVSE).
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1148214
Electrical systems that deliver access to permanent power and enable device connectivity are critical components of the design and operation of high-performance buildings. Today’s mobile technology means people can connect and move freely between the indoors and outdoors and integrate their social and work lives anytime, anywhere. This course examines permanent outdoor power delivery offerings, including personal and electric vehicle charging stations, in-ground power boxes, and rooftop boxes, that support the growing demand for connectivity and data and audiovisual communications in outdoor spaces and help to create an outdoor environment that promotes longer stays, stimulates creativity, and increases productivity.
https://redirect.aecdaily.com/s427660/www.aecdaily.com/course/749008
With the demand for sustainable power on the rise, building owners and homeowners alike are turning to solar power as a supplemental power generator. Choosing the right platform for the solar panels is a critical step in the design process and can have a significant impact on both initial and long-term costs. This course discusses the basics of photovoltaic systems, including the components and rooftop applications. Comparisons between traditional roofing and standing seam metal roofing platforms are examined, and the benefits of a nonpenetrating clamping system are discussed.
https://redirect.aecdaily.com/s9351/www.aecdaily.com/course/1036949
Electric heating systems have been in use for over a century, and in that period, they have significantly advanced in terms of their efficiency, cost effectiveness, safety, versatility, and appearance. Recently, electricity production itself has become more and more environmentally friendly and economically viable. This course explores how the wide range of contemporary electric heating options can efficiently and economically address virtually every heating need in every building type and thus capitalize on the steadily increasing benefits of electricity to create the most environmentally responsible and economically viable heating solutions.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/965090
Today’s buildings are evolving from independently functioning structures to intelligent buildings that interact with occupants and surrounding buildings. This trend has impacted the design, operation, and maintenance of data centers around the globe due to the increased demand for data and digital communication and has resulted in more high-performance data centers. This presentation addresses the specific needs of data centers and presents high-performance design solutions that support sustainable design.
https://redirect.aecdaily.com/s9727/www.aecdaily.com/course/845810
The materials we use have a significant impact on the environment, our communities, and our health. Consequently, material transparency—wherein manufacturers disclose vital sustainability information about their products—is an increasingly necessary element of modern life. This course examines the tools and resources that are available for both manufacturers and the A&D community that effectively communicate transparency information and optimization of building products. Also reviewed are the benefits of the new-generation insulated metal panels (IMPs) designed to achieve a trusted range of health and wellness certifications.
https://redirect.aecdaily.com/s801701/www.aecdaily.com/course/859212
A large portion of new commercial and residential buildings built today are equipped with clear, floor-to-ceiling glass. Does this new expansive area of glass lead to daylight optimization? This course explains the impacts of daylighting on human health and building occupant comfort. Proactive and reactive automated shading systems are discussed, and the course explains how a properly designed shading system can reduce whole-building energy consumption. Automated shading systems in projects of various scopes and scales are also discussed.
https://redirect.aecdaily.com/s840811/www.aecdaily.com/course/862566
By design, automatic pedestrian doors provide easier, more convenient access than manual doors for a wide variety of building types, and their popularity in commercial design continues to grow. Reviewed in this course are the available options of automatic door solutions, including sliding, swinging, ICC/CCU, and revolving door systems. Also discussed are the code requirements and considerations relating to automatic doors for proper specification.
https://redirect.aecdaily.com/s8170/www.aecdaily.com/course/1137958
As more companies invest in solar to generate clean power for their operations, meet environmental goals, or save money on electrical bills, architects and building owners may need to be prepared to accommodate rooftop photovoltaic (PV) systems in both existing and new buildings. This course provides an introduction to rooftop PV systems, including a discussion of modules, components, and attachments, and best practices for a durable roof and PV system.
https://redirect.aecdaily.com/s5712/www.aecdaily.com/course/946869
Designing restrooms to allow for and maximize proper hygiene is important in reducing the spread of germs. This course discusses the elements of hygienic restroom design and how reducing required touchpoints helps to increase safety and cleanliness. The key steps in proper hand hygiene are also discussed. The course then focuses on hand dryers and considers their impact on hand hygiene and sustainability. The future of commercial restroom design is then explored.
https://redirect.aecdaily.com/s485236/www.aecdaily.com/course/909216
Drying hands thoroughly is crucial for maintaining hygiene levels, and when a hand dryer is too slow, the result is many people give up trying to dry their hands and leave the bathroom with wet or damp hands. Research has shown that damp hands can transmit up to 1,000x more bacteria than dry hands. This course discusses hand-drying concepts and the advantages of hand dryers with air knife technology. It also reviews the impact the choice of hand-drying equipment has on public health, occupant comfort, facility operations, and our environment.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/836832
The commercial space design trend toward open plans has had a major impact on interior electrical and digital infrastructure. Offices, hotels, retail spaces, and transit areas all utilize open spaces, each with their own specific issues and requirements. This course provides designers with the information required to provide code-compliant, user-friendly, and convenient power, data/communication, and AV access for a wide variety of spaces and end users, including facility managers, cleaning staff, and visitors.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1028895
Energy codes at the federal, state, and local levels increasingly focus on reducing energy consumption, saving consumers money, and reducing CO2 emissions. Whether new or recently updated, energy codes play an essential role in the buildings we design, build, and ultimately live, work, and play in. This course examines the lighting requirements and provisions of ASHRAE Standard 90.1-2019 and the 2021 International Energy Conservation Code ® , with a focus on plug and lighting control strategies for energy efficiency.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/916201
Flexible work scheduling, telework, virtual work, and the high cost of office space are some of the drivers of the 21st century workspace. This open, flexible, adaptable, and casual space must still serve not only the technological needs of its users, but also the accessibility needs of a diverse population. This course examines the technical requirements for providing accessibility, universal design, and ergonomics in an open office space and looks at a variety of solutions in the functional areas of the office: open office areas, the workspace, and collaboration areas.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1030924
Lighting controls allow homeowners to adjust lamps and light fixtures from anywhere in the home without special wiring or expensive master controllers. Lighting controls can be integrated into a home for single-room, multiroom, whole-house, or automated systems. This course discusses the role of lighting in design and occupant comfort and then outlines how lighting controls can benefit occupant behavior, health, and productivity and the appeal and performance of the home, especially regarding energy efficiency.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1027351
Energy creation, distribution, and consumption are all in a period of transition. Understanding this transition and its various aspects is critical to sustainable transitional energy planning (STEP). This course delves into the reasoning behind the STEP approach and its contributions to creating resilient communities and explores available exhaustible and renewable energy resources and innovations in the energy sector that can be leveraged by STEP.
https://redirect.aecdaily.com/s890910/www.aecdaily.com/course/959066
Hidden access covers blend utility access covers with the surface continuity of streetscape, hardscape, and landscape designs. This course reviews the functions, product types, and specification and installation considerations of hidden access cover solutions.
https://redirect.aecdaily.com/s649402/www.aecdaily.com/course/1037124
It’s easy to be overwhelmed by outdoor solar lighting specs and components, especially when every manufacturer presents its products differently. Lighting professionals can help clients put these manufacturers on an equal playing field. Providing an in-depth introduction to the technology and benefits of off-grid solar lighting, this course explores why clients choose commercial solar lighting, what components make up a solar lighting system, and the three steps lighting professionals can take to ensure their clients choose a reliable, efficient, and cost-effective solution that meets their unique expectations.
https://redirect.aecdaily.com/s525798/www.aecdaily.com/course/1144778
As technology advances, lighting and power are becoming increasingly vital in enhancing user experience and building performance in healthcare environments. In this course, you’ll discover how flexible lighting solutions and their control features can transform both indoor and outdoor spaces, boosting health and productivity. You will also explore best practices for power and energy management, along with strategies for achieving safety compliance. Elevate your skills and learn how to create safe, tech-integrated spaces that support health and functionality.
https://redirect.aecdaily.com/s18525/www.aecdaily.com/course/1039961
Light is fundamental to life, and Earth’s 24-hour light–dark cycle directly impacts our physiology and behavior. Indoors, reduced exposure to daylight and increased exposure to electric light after dark interfere with circadian rhythms. This course examines how circadian rhythms affect human performance, health, and well-being, the receptors in the eye that send visual and nonvisual responses to the brain, the action spectrum for circadian stimulus, and the metrics used to quantify circadian-stimulus light. Also presented are methods for applying circadian-effective lighting systems to satisfy the requirements of WELL Building Standard™ v2, Light, Feature L03, Circadian Lighting Design.
https://redirect.aecdaily.com/s18122/www.aecdaily.com/course/1035660
The reasons for and benefits of adopting STEP have become increasingly clear as both national and international communities continue in their efforts to transition from dirty fuel sources to renewable ones. This course reviews the various systems and strategies that enable STEP, such as smart grids and microgrids, and explores strategies that STEP enables, such as integrated design processes, efficient water management, and energy innovation.
🍪 We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements. Read about how we use cookies and how you can control them by clicking here. Click "cookie settings" to adjust your preferences.
